HX-IRBT001-CCT
IR BT Led Controller-CCT
HX-IRBT001-CCT, adopts the advanced micro control unit, it is used for controlling constant voltage CW+WW LED lamps. For instance, point source of light, flexible light strip and so on; Belong to low-voltage DC power input and output with four interfaces, including V+ is the common positive interfaces, the other two for the negative interface. Meanwhile, you can turn on/off, adjust brightness/color-temperature for different lighting effects through infrared 14keys remote control.
Features:
1. Designed for CW+WW constant voltage LED lights, Working voltage DC12-24V.
2. Three channels output, Max. load current: 2CH*2A; Max. load power: 48W/12V; 96W/24V.
3. Adopts IR 14keys remote control with fashion appearance, distance up to 10 meters in the open air.
4. Memory function, each time power-on reserve the mode which stop in the last power-down;
5. 7 modes in total, including 3 static colors and 4 dynamic changes.
6. The brightness of static color is adjustable, 256 levels in total; the speed of dynamic changes is adjustable, 100 levels in total.
7. Long-press the brightness and speed key can get the fast adjustment, convenient for operation.
8. Warranty of this product is one year, exclude the artificial situation of damaged or overload working.
Technical Parameters:
Controller:
Working temperature | -20-60℃ | Supply voltage | DC12V-24V |
Static power consumption | <1W | Connecting mode | common anode |
Grayscale | 256 levels | Speed stage | 100 grade |
External dimension | L61*W35*H22 mm | Packing size | L150*W65*H40mm |
Net weight | 90g | Gross weight | 110g |
Output | 2 channels | Max. Output current | 2A*2CH |
Mode | 7 | Remote distance | Up to 10M |
Max. Output power | 12V:48W, 24V:96W | Memory function | Support |
Remote control:
Working temperature | -15℃~60℃ | Supply voltage | DC3V(CR2032battery) |
Static current | <3uA | Working current | <20mA |
Net weight | 50g | Carrier frequency | 38.0KHZ±0.76KHZ |
External dimension | L138*W40*H10 mm | Remote distance | 10M |
Direction for use
1. Connect the load wire at first, followed by the power wire; Please ensure short circuit can not occur between wires before turning on the power;
2. Operation: to ensure that there is no barrier between the remote controller and the receiver.
The functions of buttons are shown as below:
Typical Applications
Product information for placing order:
Product name | Item number |
IR BT remote LED Controller-CCT | HX-IRBT001-CCT |