Product

Phone

86-755-27966554
Address

4601-1701, 71 Xiangyin Rd., Nanlian Community, Longgang St., Longgang Area, Shenzhen, Guangdong, China (Mainland)
E-mail

k@waimaotong.com

LatestProducts

Factory new design 3CH SYNC LED Dimmer RF PWM led controller wireless remote led dimmer controller DC12-24V CE, RoHS WARRANTY

Factory New Design 3ch Sync Led Dimmer Rf Pwm Led Controller Wireless Remote Led Dimmer Controller Dc12-24v Ce,Rohs Warranty , Find Complete Details about Factory New Design 3ch Sync Led Dimmer Rf Pwm Led Controller Wireless Remote Led Dimmer Controller Dc12-24v Ce,Rohs Warranty,Sync Led Dimmer,1channle Led Dimmer Controller,Pwm Led Dimmer from Dimmers Supplier or Manufacturer-Shenzhen Hoion Lighting Co., Limited

INQUIRY

Description

Overview

Quick Details

Place of Origin:: China (Mainland)

Brand Name:: HOION

Model Number:: HX-RFBT002-DIM

Type:: Remote Control

Working temperature:: -20-60℃

Grayscale:: 256 levels

0utput voltage:: DC 12V~24V

Output Current:: 8A*3CH

Output power:: 288W/12V; 576W/24V

PWM frequency:: 433.92Mhz

Gross Weight:: 365G/PC

External dimension:: L150*W90*H60mm

Certificates:: CE,RoHS,EMC,LVD

Warranty:: 2 Years

Packaging & Delivery

Packaging Details: Neutral packing, also can OEM colorful package as your design.

Delivery Time: 1-7 days depend on the quantity you need

Factory New design LED sync Dimmer DC12-24V 3ch RF wireless remote led dimmer controller, PWM led controller, led dimming CE, RoHS WARRANTY

Product Description

HX-RFBT002-DIM

LED Sync Dimmer with RF button remote

HX-RFBT002-DIM adopts the most advanced PWM (Pulse Width Modulation) digital dimming technology, especially design for single color led strip. For instance, point source of light, flexible light strip, led modules, led strings and so on. Belong to low-voltage DC power input and output with two interfaces, including V+ is the positive interfaces, the other three for the negative interface. Meanwhile, you can turn on/off, adjust brightness for different lighting effects through RF 14keys remote control. In addition, It is convenient to use RJ45 connector to connect the multiple controllers together, and achieve the synchronization function of thousands meters led strips. In theory, they can be connected numerous.

Factory new design 3CH SYNC LED Dimmer RF PWM led controller wireless remote led dimmer controller DC12-24V CE, RoHS WARRANTY

Product Feature

l Designed for single color constant voltage LED lights, Working voltage DC12-24V.

l Three channels output, Max. load current: 3CH*8A; Max. load power: 288W/12V; 576W/24V.

l Adopts RF 14keys remote control with fashion appearance, no need line-of-sight. Control range up to 20 meters.

l Memory function, each time power-on reserve the mode which stop in the last power-down.

l Long-press the brightness and speed key can get the fast adjustment, convenient for operation.

l Multiple controllers can work synchronically when connected by network cable through the RJ45 connector, the network cable between 2 ports up to 80 meters.

l Warranty of this product is one year, exclude the artificial situation of damaged or overload working.

Technical Parameters

Controller

Working temperature	-20-60℃	Supply voltage	DC12V-24V
Static power consumption	<1W	Mode	3
Grayscale	256 levels	Speed stage	100 grade
External dimension	L91W88H24 mm	Packing size	L150W90H60mm
Net weight	280g	Gross weight	300g
Output	3 channels	Output current	≤8A(each channel)
Output power	288W/12V; 576W/24V	RF distance	≤20m
PWM frequency	433.92Mhz	Memory function	support

Remote control

Working temperature	-20℃~60℃	Supply voltage	DC3V(AAA*2)
Standby current	<18uA	Working current	<25mA
Standby power	54uW	Working power	75mW
Net weight	65g	RF frequency	433.92Mhz
External dimension	L150W40H20 mm	RF distance	≤20m

Factory new design 3CH SYNC LED Dimmer RF PWM led controller wireless remote led dimmer controller DC12-24V CE, RoHS WARRANTY

Connection:V+→COM,CH1→V-,CH2→V-,CH3→V-;

Direction for use

l Connect the load wire at first, followed by the power wire; Please ensure short circuit can not occur between wires before turning on the power;

l Adopts RF remote technology, 14 buttons in total.

The function of buttons are shown as below:

Factory new design 3CH SYNC LED Dimmer RF PWM led controller wireless remote led dimmer controller DC12-24V CE, RoHS WARRANTY

Name	Description
Set button	For setting the night light and matching code with receiver. Under night light mode, press “Set button” and hold on for 10 seconds will go into the night light setting. Press the set button again to save the setting and quit out.
ON	Turn on
OFF	Turn off
Brightness +	The brightness will add 1 level after each time press. Long-press can get fast adjusting.
Brightness -	The brightness will reduce 1 level after each time press. Long-press can get fast adjusting.
Hot brightness key +	4 levels brightness (10%,30%,70%,100% ) hot selection key, lights will go to next one after each pressing.
Hot brightness key -	4 levels brightness (10%,30%,70%,100% ) hot selection key, lights will go to last one after each pressing.
Mode key	3 modes in total: 100% static, flash, breathe
Night light	Press the button go to night light mode(night light Setting:Under night light mode, press “Set button” and hold on for 10 seconds will go into the night light setting, press the left button to down the brightness, press the right button to up the brightness. Adjustable range: 1%-10%.)
Speed +	Add the speed of dynamic mode. Long-press can get fast adjusting.
Speed -	Reduce the speed of dynamic mode. Long-press can get fast adjusting.
Delay button	The light will be delay off in 30 seconds.

Tips: Receiver can be controlled by any one the same remote as factory default; RF BT remote control delivered with unique RF code as factory default; if unique-control is needed, please matching the code before installation and using.

Matching code operation

If unique-control or new-coded-remote is needed, pairing the remote and the receiver as below operation instruction before using:

1. Step 1: Pressing key “set” and hold on, power on the controller, the load LEDs will be 50% brightness white as responding.
2. Step 2: Continuously to press the key “Mode key“ for 3 times within 5 seconds after step 1 ,the brightness of LEDs will change from 25% -10% as responding.
3. Code learning successfully, the LEDs will be back to the status before the power off, and the receiver only can be control by the remote.
4. If not, please re-operate from step 1 to 2.

Clear code operation

Back to factory default, wall-panel can be controlled by any one the same remote control.

1. Step 1: Pressing key “set” and hold on, power on the controller, the load LEDs will be 50% brightness white as responding.
2. Step 2: Continuously to press “Delay button“ 3 times within 5 seconds after step 1 ,the brightness of LEDs will change from 25% -10% as responding.
3. Code clearing successfully, the LEDs will be back to the status before the power off, and the receiver can be controlled by any remote control(any one the same remote control can be used to clear the code).
4. If not, please re-operate from step 1 to 2.