86-755-27966554
4601-1701, 71 Xiangyin Rd., Nanlian Community, Longgang St., Longgang Area, Shenzhen, Guangdong, China (Mainland)
2015 New Design 2.4G RF Wireless Multiple-zone Led Dimmer Controller For Single Color Strips , up to 10 Zones, DC12V 24V, 1CH*25A, CE,RoHS, FCC
2.4G led dimmer controller HX-MULTZ-SZ100-DIM is a capable of multiple zones unified controlling products. The system consists of two parts, the RF remote control and receiver components, to achieve integrated control of multiple areas within the effective distance range, to meet the growing demands of LED lighting environmental control from the market. Applications such as: LED strips, LED modules, LED string lights and other single color constant voltage type LED lamps.
Adopted RF touch 18-key remote control, to achieve independent/sync control of up to 10 areas, including switching, adjust mode, and speed adjustment and brightness adjustment. The receiver section compatible with the HOION RGB signal amplifier for power expansion, to achieve more control of LED lights, in theory, numerous RGB amplifiers can be connected.
Features
l Used for constant voltage single color LED lamps, working voltage DC12-24V.
l Multiple-zone unified control, achieve independent control of up to 10 zones.
l User-friendly designing with LCD screen show the current state and clear function key area.
l Adopt RF remote control technology, as RF signal sender, RF frequency: 433.92MHz.
l Sleep-wakeup design, for energy conservation.
l Transmission Distance:up to 30m,no need line-of-sight.
Technical Parameters
Controller :
Working temperature | -20-60℃ | Supply voltage | DC12~24V |
Standby power | <1W | Connecting mode | common anode |
Brightness levels | 256 | Speed levels | 100 |
Net weight | 180g | Gross weight | 200g |
External dimension | L127*W41*H32 (mm) | Output | 1 channels(sync) |
Output current | <25A | Output power | 12V:<300W, 24V:<600W |
RF distance | ≤30m | RF frequency | 2.4GHz |
Memory function | support | Effect | 2 |
RF remote control, model for separately purchase: HX-MULTZ-RCDIM.
Working temperature | -20-60℃ | Supply voltage | 12V/23A*2 |
Standby current | 6.5uA | Working current | 16mA |
Standby power | 0.078mW | Working power | 0.192W |
Net weight | 120g | External dimension | L150*W62*H25 (mm) |
RF distance | ≤30m | RF frequency | 2.4GHz |
Interface Specifications
Adopt male and female connector with screw.
Direction for use
Adopt RF remote control technology, with one LCD screen and 18 buttons.
The function of each button as below:
Name of key | Instruction | Remarks |
ON/OFF | ON or OFF in any time |
|
IP | Used for IP setting |
|
Zone selection | 0-9 for up to 10 zones | Matching the all RF codes before using. |
Fun | Static/Dynamic model | 2 modes in total. |
B/S + | Brightness/speed +, 256 levels in total. | Adjust brightness for static model, Adjust speed for dynamic model. |
B/S - | Brightness/speed -, 100 levels in total. | |
Hot key | Hot key for static lighting, 50%/100% level static lighting. |
|
ALL | Hot key for selecting all zones before operation | All zones will be in control. |
LCD screen | Show the current state, zone, ON/OFF, brightness/speed levels |
|
Important: the remote control will sleep with 10 seconds unused.
2 modes as below:
No | Patterns | Remarks |
1 | Static white | Brightness is adjustable |
2 | Single color breath | Speed is adjustable |
Zone setting:
From 0 to 9, 10 codes for up to 10 zones, matching RF codes with all receivers before using. Matching operation as below:
1. Press and hold the “IP” key and powering on the receiver(Or Press “IP” key within 2 seconds after powering on the receiver), the LEDs loading will output 50% brightness white. (Tip: if the output does not output 50% brightness, indicating that the code learning is not successful, need to repeat the step 1).
2. Press the “Number” key 3 times (each time should be finished within 3 seconds after the last time), the LEDs will change as: 25% brightness white à10% brightness whiteàback to the mode before power off. It indicates the successful code learning. If not, repeat from step 1.
Important: the remote control will sleep with 10 seconds unused, needs to press “ON/OFF” or “IP” key to wake up it first before using.
Typical Applications
Application Circuit: RF remote control and receiver:
