86-755-27966554
4601-1701, 71 Xiangyin Rd., Nanlian Community, Longgang St., Longgang Area, Shenzhen, Guangdong, China (Mainland)
Factory New design LED sync Dimmer DC12-24V 3ch RF wireless remote led dimmer controller, PWM led controller, led dimming CE, RoHS WARRANTY
HX-RFBT002-DIM
LED Sync Dimmer with RF button remote
HX-RFBT002-DIM adopts the most advanced PWM (Pulse Width Modulation) digital dimming technology, especially design for single color led strip. For instance, point source of light, flexible light strip, led modules, led strings and so on. Belong to low-voltage DC power input and output with two interfaces, including V+ is the positive interfaces, the other three for the negative interface. Meanwhile, you can turn on/off, adjust brightness for different lighting effects through RF 14keys remote control. In addition, It is convenient to use RJ45 connector to connect the multiple controllers together, and achieve the synchronization function of thousands meters led strips. In theory, they can be connected numerous.
Product Feature
l Designed for single color constant voltage LED lights, Working voltage DC12-24V.
l Three channels output, Max. load current: 3CH*8A; Max. load power: 288W/12V; 576W/24V.
l Adopts RF 14keys remote control with fashion appearance, no need line-of-sight. Control range up to 20 meters.
l Memory function, each time power-on reserve the mode which stop in the last power-down.
l Long-press the brightness and speed key can get the fast adjustment, convenient for operation.
l Multiple controllers can work synchronically when connected by network cable through the RJ45 connector, the network cable between 2 ports up to 80 meters.
l Warranty of this product is one year, exclude the artificial situation of damaged or overload working.
Technical Parameters
Controller
Working temperature | -20-60℃ | Supply voltage | DC12V-24V |
Static power consumption | <1W | Mode | 3 |
Grayscale | 256 levels | Speed stage | 100 grade |
External dimension | L91*W88*H24 mm | Packing size | L150*W90*H60mm |
Net weight | 280g | Gross weight | 300g |
Output | 3 channels | Output current | ≤8A(each channel) |
Output power | 288W/12V; 576W/24V | RF distance | ≤20m |
PWM frequency | 433.92Mhz | Memory function | support |
Remote control
Working temperature | -20℃~60℃ | Supply voltage | DC3V(AAA*2) |
Standby current | <18uA | Working current | <25mA |
Standby power | 54uW | Working power | 75mW |
Net weight | 65g | RF frequency | 433.92Mhz |
External dimension | L150*W40*H20 mm | RF distance | ≤20m |
Connection:V+→COM,CH1→V-,CH2→V-,CH3→V-;
Direction for use
l Connect the load wire at first, followed by the power wire; Please ensure short circuit can not occur between wires before turning on the power;
l Adopts RF remote technology, 14 buttons in total.
The function of buttons are shown as below:
Name | Description |
Set button | For setting the night light and matching code with receiver. Under night light mode, press “Set button” and hold on for 10 seconds will go into the night light setting. Press the set button again to save the setting and quit out. |
ON | Turn on |
OFF | Turn off |
Brightness + | The brightness will add 1 level after each time press. Long-press can get fast adjusting. |
Brightness - | The brightness will reduce 1 level after each time press. Long-press can get fast adjusting. |
Hot brightness key + | 4 levels brightness (10%,30%,70%,100% ) hot selection key, lights will go to next one after each pressing. |
Hot brightness key - | 4 levels brightness (10%,30%,70%,100% ) hot selection key, lights will go to last one after each pressing. |
Mode key | 3 modes in total: 100% static, flash, breathe |
Night light | Press the button go to night light mode(night light Setting:Under night light mode, press “Set button” and hold on for 10 seconds will go into the night light setting, press the left button to down the brightness, press the right button to up the brightness. Adjustable range: 1%-10%.) |
Speed + | Add the speed of dynamic mode. Long-press can get fast adjusting. |
Speed - | Reduce the speed of dynamic mode. Long-press can get fast adjusting. |
Delay button | The light will be delay off in 30 seconds. |
Tips: Receiver can be controlled by any one the same remote as factory default; RF BT remote control delivered with unique RF code as factory default; if unique-control is needed, please matching the code before installation and using.
Matching code operation
If unique-control or new-coded-remote is needed, pairing the remote and the receiver as below operation instruction before using:
Clear code operation
Back to factory default, wall-panel can be controlled by any one the same remote control.
Typical Applications
Product information for placing order
Product name | Item number |
LED Sync Dimmer with RF button remote | HX-RFBT002-DIM |
more items to recommend
